F9 E1 indicates an excessively long drain time on front-load Whirlpool machines; drn indicates incorrect draining on HE top-loaders. Both require the drainage system to be checked, without interchanging codes between control panels.
Follow the drainage route
The manufacturer’s documentation links F9 E1 to the drain time. The permitted height and access to the filter are specified in the model’s manual: not all Whirlpool machines have a user-accessible filter at the front.
- If water is still in the machine, visually check for kinks in the hose and whether water is backing up from the household drain.
- After installation, check the height, support and outlet connection against the appliance diagram.
- If there is a lot of foam, note the detergent and quantity used; foam can also lengthen the draining time.
Before removing a filter
Stop the programme, safely disconnect the appliance from the power supply and let the water cool. Use the user-accessible draining procedure in the manual, with a container ready and a way to stop the water flow. Do not unscrew a plug completely while the drum is full. Once empty, clean only the parts you can access and refit the plug so it is watertight; see preparing and cleaning the filter.
If the hose and accessible filter are clear but water is still trapped, avoid running further cycles and request assistance. Hearing the pump does not prove that it is draining correctly or confirm that it needs replacing.
Tell the technician whether the message appears every time the machine drains or only with certain loads and products.
View all articles in Whirlpool washer error codes and messages
