F5 E2 error on a Whirlpool washing machine: the door won’t lock

On the documented Whirlpool front-load platform, F5 E2 indicates that the door is not locking properly. First check the latch and for trapped laundry.

A closed door does not mean the lock has engaged

The warning described in the manufacturer’s documentation appears when the lock required to start or continue the cycle has not engaged. Note whether this happens before water enters or during the wash; this helps when describing the problem.

  1. Stop selecting the programme. Only open the door once it unlocks normally.
  2. Remove any item of clothing caught across the seal or latch. If laundry is pressing against the door, reduce the load.
  3. Close the door normally and check that there is no visible object in the latch area.
  4. Use the cancellation and retry procedure specified for your model’s control panel.

If the door will not open or there is water inside, do not pull the handle to complete this check. Follow the door and safety lock procedure before trying to retrieve laundry.

If it appears again

If the door looks properly closed but F5 E2 persists, the locking system needs to be checked. This does not in itself confirm which part is faulty. Lid warnings on HE top-loaders have their own procedure in the Whirlpool index; do not apply the front-load door instructions to them.

Do not insert objects or use electrical jumpers in the lock to make the washing machine start.

View all articles in Whirlpool washer error codes and messages