F9 E1 Error or drn Warning on Whirlpool: Drainage Problems

F9 E1 indicates an excessively long drain time on Whirlpool front-load washers; drn indicates improper draining on HE top-load models. Both call for checking the drainage system, but don’t interchange codes between control panels.

Trace the drainage path

The manufacturer’s documentation links F9 E1 to drain time. The permitted height and access to the filter are specified in the model’s manual: not all Whirlpool washers have a user-accessible front filter.

  • If water remains in the washer, visually check for kinks in the hose and see whether water is backing up from the household drain.
  • After installation, check the height, support and outlet connection against the appliance diagram.
  • If there’s a lot of suds, note the detergent and amount used; suds can also slow drainage.

Before removing a filter

Stop the cycle, safely disconnect the appliance from power and let the water cool. Use the user drain procedure in the manual, with a container ready and a way to stop the flow. Don’t unscrew a cap completely while the drum is full. Once it’s empty, clean only accessible parts and close everything securely to prevent leaks; see how to prepare and clean the filter.

If the hose and accessible filter are clear but water remains in the washer, avoid running more cycles and request service. Hearing the pump doesn’t prove that it’s draining properly or confirm that it needs to be replaced.

Tell the technician whether the message appears every time the washer drains or only with certain loads and products.

View all articles in Whirlpool washer error codes and alerts