F7 E1 indicates a speed-detection problem on the documented Whirlpool front-loading washing machine: the motor does not reach the speed required by the cycle.
If it has just been installed or the load has changed
The manufacturer’s documentation recommends checking the transport materials and whether the machine is overloaded. If the first wash fails, check the unpacking section of the manual and confirm that the installer removed the shipping restraints. Do not run the machine to see what happens with them still in place.
If the error started with an especially large load, stop the cycle, wait for the door to unlock and reduce the amount of laundry in line with the programme. Selecting a higher spin speed does not make a bulky item suitable for the programme.
What the code indicates and what still needs diagnosing
F7 E1 indicates that the control cannot confirm the speed. On its own, it does not prove that the motor, a sensor or the electronics are faulty. Note whether the drum tries to turn, whether the fault appears when starting or spinning, and whether it began after the machine was moved.
Only try again as instructed on the control panel after correcting the accessible issue. If the error returns, arrange a service visit. The explanation of the speed sensor helps explain what the technician needs to check; you do not need to measure circuits or dismantle the motor.
Stop using the machine if it makes abnormal banging noises when attempting to turn or moves out of place.
View all articles in Whirlpool washer error codes and messages
