dET and F8 E2 affect the Whirlpool dispenser, but they do not mean the same thing: dET indicates that a cartridge has not been detected, while F8 E2 indicates a problem with the dispensing system.
dET: check whether you are using a cartridge
On compatible models listed in the manufacturer’s documentation, check that the cartridge is inserted in its holder and that the drawer is fully closed. If you are using the manual dosing option supported by your machine, dET may not mean that you need to replace a missing cartridge: check the selected mode before adding any product.
Do not put a cartridge in a drawer that is not designed to hold one, or force it to fit. Note whether the warning started after you removed or refilled the cartridge, or changed the settings.
F8 E2: residue and dispensing path
Stop the programme and check the manual to see which parts of the drawer can be removed. Clean any accessible detergent build-up and refit each insert in its correct position. The guide to cleaning the automatic dosing system explains the difference between the reservoir and the circuit.
If the cartridge is recognised but the product is not being used, or F8 E2 reappears when the drawer is clean, request a diagnosis. Adding more detergent does not prove that the system is dispensing it and could result in a double dose.
Report separately the message shown, the dosing mode and whether the product is being used.
View all articles in Whirlpool washer error codes and messages
