4C2, 4E2 and nF1 are associated with water that is too hot at the cold inlet on the documented Samsung models. Check which supply lines are connected to the inlets before investigating the internal heater.
The Samsung USA table associates this error-code family with the hot and cold connections being reversed. CE and 14C2 also appear in that table, but this should not be assumed to apply in every market.
Check where each connection leads
If the problem started after the washer was installed or moved, check the labels on its inlets and where the hoses lead. Identify which water supply reaches the cold inlet; don’t rely solely on the colour of a hose that may have been replaced.
To correct this, stop the appliance and shut off the water supplies. Don’t loosen a connection while it is hot or under pressure. If you can’t identify the shut-off valves with certainty, or the installation needs plumbing work, ask the installer to do it.
This alarm is different from 4C, which indicates a fill problem, and from a heater error. If the connections match the exact diagram and the alert persists, provide support with the model number and installation details.
Don’t swap hoses as a trial-and-error fix: first confirm which supply is cold and what the appliance manual requires.
View all articles in Samsung washer error codes and messages
