Samsung washing machine errors 4C2 / 4E2 / nF1: cold inlet water too hot

4C2, 4E2 and nF1 are associated with water that is too hot at the cold inlet on the Samsung models documented. Check which inlet is which before investigating the internal heater.

The Samsung USA table associates this group of errors with the hot and cold connections being reversed. CE and 14C2 also appear in that table, but this should not be assumed to apply in every market.

Check where each connection leads

If the problem started after installing or moving the washing machine, check the labels on its inlets and where the hoses lead. Identify which water supply reaches the cold inlet; do not rely solely on the colour of a hose that may have been replaced.

To correct this, switch off the appliance and turn off the water supply. Do not loosen a connection while it is hot or under pressure. If you cannot identify the taps with certainty, or the installation requires plumbing changes, ask the installer to do it.

This alert is different from the 4C no-fill error and from a heater error. If the connections match the exact diagram and the alert persists, give support the model number and details of the installation.

Do not swap the hoses as a trial: first confirm which supply is cold and what the appliance manual requires.

View all articles in Samsung washing machine error codes and alerts