Error 4C2 / 4E2 / nF1 on Samsung washing machines: cold inlet too hot

4C2, 4E2 and nF1 are associated with water that is too hot at the cold inlet on the documented Samsung models. Check which inlet is which before investigating the internal heater.

The Samsung USA table associates this group of errors with the hot and cold connections being swapped. CE and 14C2 also appear in that table, but this should not be extrapolated to every market.

Check where each connection leads

If the problem began after installing or moving the washing machine, check the labels on its inlets and where the hoses lead. Identify which water supply is connected to the cold inlet; do not rely solely on the colour of a hose that may have been replaced.

To correct this, stop the machine and turn off the water supplies. Do not loosen a connection while it is hot or under pressure. If you cannot identify the taps with certainty, or the installation requires plumbing changes, ask the installer to do it.

This alarm is different from 4C, which indicates a filling issue, and from a heater error. If the connections match the exact diagram and the alert persists, give support the model reference and details about the installation.

Do not swap the hoses as a trial: first confirm which supply is cold and what the appliance manual requires.

View all articles in Samsung washing machine error codes and warnings