Error 4C / 4E / nF on Samsung washing machines: not filling

4C, 4E and nF indicate that filling is not working correctly on the documented Samsung models. Check the water supply and the inlet configuration actually used by your model.

The Samsung USA table groups these codes together. Some platforms add a prefix; keep it visible in the photo of the control panel.

Check the water inlet before assuming there is a fault

Check the washing machine's own tap, any water supply interruptions and crushed hoses. On a model with hot and cold inlets, check the connections against the labels; on one designed for a single inlet, don't add a second connection based on a US table.

If the manual allows you to check the inlet screens, turn off the taps and disconnect the power before removing the specified connections. Don't permanently remove safety filters to increase the flow rate.

If water is entering and draining away at the same time, check the drain hose installation against the manual. Siphoning can prevent the water from reaching the required level even when the inlet is open. If the external water supply and installation are correct and 4C appears again, request a diagnosis; the message does not prove that a valve is faulty.

If the alarm displayed is 4C2, keep the final number too: it points to another query related to the inlet water temperature.

View all articles in Samsung washing machine error codes and warnings