4C, 4E and nF indicate that filling is not working correctly on the documented Samsung models. Check the water supply and the inlet configuration actually used by your model.
The Samsung USA table groups these codes together. Some platforms add a prefix; retain it in the photo of the control panel.
Check the water inlet before assuming there is a fault
Check the washing machine’s dedicated tap, any water supply interruptions and kinked hoses. On a model with hot and cold inlets, check the connections against the labels; on one designed for a single inlet, do not add a second connection based on a US table.
If the manual allows you to check the inlet mesh filters, turn off the taps and disconnect the power supply before dismantling the specified connections. Do not permanently remove safety filters to increase the water flow.
If water enters and drains away at the same time, check that the drain hose is installed as specified in the manual. Siphoning can prevent the water from reaching the required level even when the inlet is not closed. If the external water supply and installation are correct and 4C appears again, request a diagnosis; the message does not prove that a valve is faulty.
If the alarm shown is 4C2, note the final digit as well: it refers to a separate query related to the inlet water temperature.
View all articles in Samsung washing machine error codes and alerts
