F210 or Check filter + nozzle on Miele affects the recirculation of soapy water. Check the accessible nozzle in the seal and the filters intended for user maintenance.
Start with the upper nozzle
The manufacturer’s documentation identifies possible lint build-up in the nozzle located at the top of the door seal. With the appliance switched off and the door open normally, remove only accessible surface lint, in accordance with the manual. Do not insert wires or dismantle the duct.
Filters after draining
If the manual recommends checking the filters, switch off and safely disconnect the appliance, then wait for the water to cool. Place a container underneath and open the relevant part gradually as instructed; do not remove the entire filter while water is still flowing out.
Then remove any accessible debris, put each filter back on its correct side and tighten the closure properly. Incorrect reinstallation can cause a leak. Check the filter section of your model’s manual for instructions on draining.
F210 is not the same as F11: this error relates to the internal circulation of soapy water, even though some maintenance points may be the same. If the permitted cleaning does not clear the warning, request assistance without opening the recirculation circuit.
Mention whether you found lint in the nozzle or debris in the filters; these are different observations.
View all articles in Miele washing machine error codes and alerts
