F210 or Check filter + nozzle on Miele affects the circulation of soapy water. Check the accessible nozzle in the door seal and the filters intended for user maintenance.
First, the upper nozzle
The manufacturer's documentation identifies a possible build-up of lint in the nozzle located at the top of the door seal. With the appliance stopped and the door opened normally, remove only accessible surface lint in accordance with the manual. Do not insert wires or dismantle the duct.
Filters after draining
If the manual says to check the filters, switch off and safely disconnect the appliance, then wait for the water to cool. Place a container underneath and open gradually using the specified access point; do not remove the filter completely while water is still draining.
Next, remove accessible debris, put each filter back on its side and tighten the closure correctly. Incorrect refitting can cause a leak. Refer to the filter section of the manual for your model to prepare for draining.
F210 is not the same as F11: this error concerns the internal circulation of soapy water, although some maintenance points may be the same. If the permitted cleaning does not clear the warning, request assistance without opening the recirculation circuit.
Mention whether you found lint in the nozzle or debris in the filters; these are different observations.
View all articles in Miele washing machine error codes and messages
