Error F210 or Check filter + nozzle on Miele

F210 or Check filter + nozzle on Miele affects the recirculation of soapy water. Check the accessible nozzle in the door seal and the filters intended for user maintenance.

First, the upper nozzle

The manufacturer’s documentation identifies possible lint buildup in the nozzle at the top of the door seal. With the machine stopped and the door opened normally, remove only accessible surface lint, as directed in the manual. Don’t insert wires or dismantle the duct.

Filters: drain first

If the manual says to check the filters, turn off and safely disconnect the machine, then wait for the water to cool. Place a container underneath and open the filter access gradually, as directed. Don’t remove the filter completely while water is still draining.

Then remove any accessible debris, put each filter back on its proper side and tighten the closure correctly. Incorrect reinstallation can cause a leak. See the filter section of your model’s manual for instructions on draining the water.

F210 is not the same as F11: this error concerns the internal circulation of soapy water, although some maintenance points may be the same. If the permitted cleaning doesn’t clear the warning, request service without opening the recirculation circuit.

Report whether you found lint in the nozzle or debris in the filters; these are different observations.

View all articles in Miele washer error codes and messages