Miele F138 error: Waterproof activated

Miele F138 indicates that Waterproof has been activated due to water in the base tray. Turn off the water supply and arrange for the leak to be inspected.

Turn off the water supply and isolate the appliance safely

The manufacturer's documentation links F138 to an internal leak. Turn off the tap if you can reach it from a dry area. Disconnect the appliance at the designated point only when it is safe to do so; if there is water near electrical connections, get help without touching the plug or stepping through the water.

The pump running continuously may be part of the protective response. Make a note if you can hear it, but don't keep using the appliance to check how long it takes to stop.

Trapped laundry and water inside the appliance

Miele recommends having its service team remove water from the base and carry out repairs. Don't tilt the appliance or open panels to dry it out and clear the warning. If you need to retrieve laundry, use only the emergency procedure in the manual, and only when the specified conditions for cold water, a safe water level, disconnection and a stopped drum have been confirmed.

From outside the appliance, note where the water is and at what stage it appeared. The leak location guide can help you describe these observations; identifying the internal source requires diagnosis.

The fact that there is no longer any water on the floor does not confirm that Waterproof was activated for a cause that has already been resolved.

View all articles in Miele washing machine error codes and alerts