F138 on a Miele indicates that Waterproof has activated because of water in the bottom tray. Shut off the water supply and arrange to have the leak inspected.
Stop the water supply and isolate the machine safely
The manufacturer’s documentation links F138 to an internal leak. Turn off the tap if you can reach it from a dry area. Disconnect the machine using the designated point only when it’s safe to do so. If there’s water near electrical connections, get help without touching the plug or stepping through the water.
The pump running continuously may be part of the safety protection. Make a note if you hear it, but don’t keep using the machine to check how long it takes to stop.
Trapped laundry and water inside the machine
Miele recommends having its service team remove water from the base and repair the machine. Don’t tilt the machine or open any panels to dry it out and clear the alert. If you need to retrieve laundry, use only the emergency procedure in the manual, and only after confirming the conditions for cold water, a safe water level, disconnection and a stopped drum.
From outside the machine, note where the water is and at what stage it appeared. The leak-finding guide can help you describe what you observe; identifying the source inside the machine requires a diagnosis.
Water no longer being visible on the floor doesn’t confirm that Waterproof activated because of a cause that has already been resolved.
