Miele Error F138: Waterproof is activated

F138 on a Miele appliance indicates that Waterproof has been activated because of water in the bottom tray. Turn off the water supply and arrange for the leak to be inspected.

Stop the water supply and isolate the appliance safely

The manufacturer’s documentation associates F138 with an internal leak. Turn off the tap if you can reach it from a dry area. Disconnect the appliance using the designated isolator only if it is safe to do so; if there is water near electrical connections, seek help without touching the plug or walking through the water.

The pump running continuously may be part of the protective response. Make a note if you hear it, but do not keep the appliance running to check how long it takes to stop.

Trapped laundry and water inside the appliance

Miele advises that water removal from the base and repairs should be carried out by its service team. Do not tilt the appliance or open panels to dry it and clear the warning. If you need to retrieve laundry, use only the emergency procedure in the manual, and only when the conditions for cold water, a safe water level, disconnection and a stationary drum have been verified.

From the outside, note where the water is and at what stage it appeared. The leak location guide can help you describe these observations; identifying the internal source requires a diagnosis.

The fact that no water is visible on the floor does not confirm that the cause of Waterproof activation has been resolved.

View all articles in Miele washing machine error codes and messages