Sud LOC warning on Fisher & Paykel: foam lockout

Sud LOC indicates a pause related to excess foam on the documented Fisher & Paykel front-loading machines. Allow the intended recovery process before treating an extended cycle as a fault.

The WH7560P1/WH8560P1 and WH7560J1/WH8560J1 manual describes an automatic ten-minute wait before resuming. This behaviour applies to those product families, not to all Fisher & Paykel machines.

What to do during the pause

If there is no leak or other alarm, follow the recovery procedure in the manual without adding detergent or homemade anti-foam products. Opening the machine or switching it off to shorten the wait may interrupt the intended process.

If there is water outside the machine, deal with the leak and avoid contact with wet electrical components. Do not simply keep waiting because Sud LOC is a foam warning.

Correct your usage before the next wash

Check that the detergent is suitable for front-loading machines and measure the dose according to the product, the load size and how soiled the laundry is. A more concentrated formula or a small load may require less product. See detergent dosing and foam control to adjust these habits.

If the warning recurs after you have corrected your usage and followed the authorised recovery procedure, arrange an inspection; do not conclude that the pump is damaged based on an isolated foam incident.

Note how much product you added and whether any residue remained from a previous wash, so you can explain a recurrence of Sud LOC.

View all articles in Fisher & Paykel washing machine codes and alerts