Sud LOC warning on Fisher & Paykel: foam lock

Sud LOC indicates a pause related to excess foam in the documented Fisher & Paykel front-loaders. Allow the specified recovery process before treating an extended cycle as a fault.

The WH7560P1/WH8560P1 and WH7560J1/WH8560J1 manual describes an automatic ten-minute wait before resuming. This behaviour applies to those product families, not all Fisher & Paykel machines.

What to do during the pause

If there is no leak or other alarm, follow the recovery instructions in the manual without adding detergent or homemade anti-foam products. Opening the machine or switching it off to shorten the wait may interrupt the intended process.

If there is water outside the machine, deal with the leak and avoid contact with wet electrical components. Do not keep waiting just because Sud LOC is a foam warning.

Correct your usage before the next wash

Check that the detergent is suitable for front-loaders and measure the dose according to the product, load size and soil level. A more concentrated formula or a small load may require less detergent. See detergent dosing and foam control to adjust these habits.

If the warning recurs after you have corrected your usage and followed the authorised recovery process, request an inspection; do not conclude that the pump is damaged based on an isolated foam issue.

Note how much detergent you added and whether any residue remained from a previous wash, so you can explain a recurring Sud LOC warning.

View all articles in Fisher & Paykel washing machine codes and alerts