
The documented Fisher & Paykel front-loaders distinguish between usage alerts and faults displayed as Err followed by a number. The model reference and the full message determine which check is appropriate.
Families covered by this index
The WashSmart/QuickSmart front-loader manual consulted covers WashSmart WH7560P1/WH8560P1 and QuickSmart WH7560J1/WH8560J1. Its messages do not apply to top-loaders, washer-dryers or different generations.
Before changing any settings, photograph the display and note whether the machine beeped, stopped or was waiting. Muting a beep does not resolve the condition that triggered the alert.
Alerts that point to a user action
No TAP points to the water supply; out of bAL to load distribution; Sud LOC to suds. door Locd and door OPEn distinguish a locked door from an open door. They are not interchangeable and cannot be resolved by forcing the same closure.
If Err appears with a number
Keep a record of the number and follow the recovery steps permitted by the manual. If it returns, or the document directs you to contact support, give the service team the model reference and the sequence of events. Do not reconstruct a numerical code table from forums or use a fault code for another WashSmart model just because it shares the same product name.
Frequently Asked Questions
Do WashSmart and QuickSmart always display the same alerts?
This cannot be guaranteed for every generation. This index uses the specific front-loaders covered by the WH7560P1/WH8560P1 and WH7560J1/WH8560J1 manuals.
Is it enough to note Err without the number that follows?
No. Err indicates a fault, and the number that follows identifies it for the service team. Photograph both before attempting any recovery steps.
Where can I find the full model number of my Fisher & Paykel washing machine?
On the machine's identification plate. The manual consulted says that identification details are on the rear and/or above the drum opening; do not move an installed machine or force a door to access them. Check the location given for your model.
When checking the message, keep the model family and the full message together; a truncated word or an Err without a number loses diagnostic information.




