Bosch error E18: blocked filter or drain

The Bosch guide to E18 recommends checking the filter, accessible pump and drain hose. If water remains in the machine, prepare to drain it before removing any plug.

External checks

The drainage procedure in the manufacturer’s documentation starts with draining the water. Check whether the hose was kinked when the washing machine was installed, or whether the household waste trap is blocked. Compare the installation with the E-Nr. manual.

Opening the filter with the water cool and under control

  1. Switch off and safely unplug the appliance. Wait for the wash water to cool.
  2. Prepare a container and use the emergency hose or the draining method specified in the manual.
  3. Do not remove the plug completely while water is flowing; stop the flow to empty the container.
  4. Once empty, clean any accessible debris, the thread and the seat; then close it securely.

The guide to cleaning the drain filter provides further preparation advice. If the plug does not turn normally, do not force it with a tool.

If the filter and accessible outlet are clear but E18 persists, request a service visit. Do not assume the pump is faulty without a diagnosis, and do not run repeated cycles while water remains in the machine.

Check that the filter is watertight before you finish cleaning.

View all articles in Bosch washing machine error codes and alerts