Bosch error E17 or F17: water inlet time exceeded

E17 or F17 on a Bosch indicates that the water supply time has been exceeded. Open and check the tap; if the message persists despite the water supply being available, request assistance.

Distinguish between a water supply outage and a persistent fault

The manufacturer’s documentation confirms the E17/F17 pair. If the problem started when you installed the appliance or after a holiday, check that the washing machine’s tap has not been left closed. If there is no water in the property either, wait for the supply to be restored before starting a new programme.

With the tap open, note whether you can hear no water entering or whether the machine starts filling and then stops. Do not open the casing or assume that the message is directly caused by the solenoid valve.

Further checks require the E-Nr

The permitted pressure, cleaning of the filters and recovery procedure are covered in the installation and operating manual for your model. Do not use a flow rate, height or button sequence from another Bosch model. The guide to slow or no filling helps you organise your observations without assuming that a part has failed.

If the tap is open and the household water supply is working but E17/F17 appears again, provide the E-Nr and request a diagnosis. Do not include another code, such as E29, in this process without specific confirmation.

Include the complete code in your assistance request, including the initial letter.

View all articles in Bosch washing machine error codes and alerts