E23 on the documented Bosch washing machines indicates a leak or water in the base tray. Turn off the water supply tap and deal with the leak before trying to continue.
Contain the leak without dismantling anything
The manufacturer’s documentation advises turning off the water supply if a leak is suspected. Do this from a dry, accessible position. If there is water near electrical components, do not step into the puddle or handle the plug; seek help to isolate the appliance safely.
From the outside, check whether water is appearing at a hose connection, beneath the drawer, at the door or under the casing. Note whether it started while filling, washing or draining. Drying the floor makes it possible to spot any new leaks, but does not prove that the source has been repaired.
Water in the base with no visible puddle
The base tray may hold water internally; not seeing it on the floor does not rule out the indicated condition. Do not tilt the washing machine to drain it or repeat programmes to make E23 disappear. Refer to the leak-location guide for external checks only, and seek assistance if the warning persists.
Check the E-Nr: this meaning applies to documented Bosch washing machines, not to an E23 on a dishwasher.
If you need assistance, note where the water is, the stage of the cycle and take a photo of the warning without opening any panels.
View all articles in Bosch washing machine error codes and alerts
