Bosch Error E18: blocked filter or drain

The Bosch E18 guide recommends checking the filter, accessible pump and drain hose. If water is trapped, prepare to drain it before removing any cap.

External checks

The drainage procedure in the manufacturer's documentation starts with draining the water. Check whether the hose was kinked when the washing machine was installed or whether the household trap is blocked. Compare the installation with the E-Nr. manual.

Opening the filter with the water cool and under control

  1. Switch off and safely unplug the appliance. Wait for the wash water to cool.
  2. Prepare a container and use the emergency drain hose or the draining method specified in the manual.
  3. Do not remove the cap completely while water is flowing; stop the flow to empty the container.
  4. Once empty, clean any accessible debris, the thread and the seat; then close it securely.

The drain filter cleaning guide provides more information on preparation. If the cap does not turn normally, do not force it with a tool.

If the filter and accessible outlet are clear but E18 persists, arrange a service call. Do not assume the pump is faulty without a diagnosis, and do not run repeated cycles while water is trapped.

Check that the filter is watertight before finishing the clean.

View all articles in Bosch washing machine error codes and warnings