Beko washing machine error codes and warnings

Beko washing machine error codes and warnings

This Beko index uses the warning table from the B3WFU48215WW ES manual. Its codes may appear in the history and do not automatically indicate an active fault on every Beko model.

Identify when the warning appeared

The table on page 40 of the manufacturer’s documentation includes appliance records that you can check. Note whether you saw the code during a wash that failed or while checking previous information. An old record does not prove that the problem is still present.

Which steps to follow

WarningScope on this platform
E5 and E27Pump filter and drainage system.
E8Possible lack of water supply.
E17Foam remaining at the end.
E18Spin cycle not started due to an imbalance.
E12Possible water inside or beneath the appliance.
E29Self-protection due to supply conditions.
E84BLE Bluetooth connection not established.

E5/E27 requires you to prepare for draining before opening a filter. E12 requires you to check for water and stop if there is a leak; clearing the history will not resolve it. E84 relates to HomeWhiz and does not, by itself, diagnose a washing machine fault.

Before applying an instruction

Compare the full model number with the manual. The filter location, cancellation controls and connectivity may vary between series. Do not enter technical modes to obtain more codes or apply a generic list from the internet.

Frequently Asked Questions

Where can I find the full model number of my Beko washing machine?

Look for the full model number on the appliance rating plate and check it against the manual cover. This index is based on the B3WFU48215WW ES; a similar name does not prove that the table is identical.

Does the same code mean the same thing on all your washing machines?

No. Codes vary between Beko platforms. Check that the appliance manual confirms the meaning before using a list for another series.

How can I tell a normal warning from a fault?

Check whether the warning appears during the current wash or in an earlier record. A stored condition and a fault that recurs during the cycle require different assessments.

Does clearing the code confirm that the problem is resolved?

No. Removing a display or checking the history again does not prove that a supply issue, load imbalance or leak has been fixed. Assess how the appliance operates after carrying out the permitted correction.

What information should I give the service technician?

Give the full model number and the code, and say whether it came from the current cycle or the history. Include the programme stage, whether the water supply is available, the laundry load and any water visible beneath the appliance.

Describe what is happening now as well as the stored code: the history and current behaviour are complementary information.