Beko washing machine error codes and alerts

Beko washing machine error codes and alerts

This Beko index uses the alert table in the B3WFU48215WW ES manual. Its codes may appear in the history and do not automatically indicate an active fault in every Beko model.

Identify when the alert occurred

The table on page 40 of the manufacturer's documentation includes records that can be checked on the appliance. Note whether you saw the code during a wash that failed or while checking previous information. An old record does not prove that the problem is still present.

Which steps apply

AlertScope on this platform
E5 and E27Pump filter and drain installation.
E8Possible lack of water supply.
E17Foam at the end of the cycle.
E18Spin cycle not started due to an unbalanced load.
E12Possible water inside or underneath the appliance.
E29Self-protection due to supply conditions.
E84BLE Bluetooth connection not established.

E5/E27 requires you to prepare to drain the water before opening a filter. E12 requires you to check for water and stop if there is a leak; clearing the history will not fix it. E84 relates to HomeWhiz and does not, on its own, diagnose a washing machine fault.

Before following an instruction

Check the full model number against the manual. The filter location, cancellation controls and connectivity may vary between series. Do not enter service modes to obtain more codes or use a generic list from the internet.

Frequently Asked Questions

Where can I find the full model number of my Beko washing machine?

Look for the full model number on the appliance rating plate and compare it with the cover of the manual. This index is based on B3WFU48215WW ES; a similar model name does not prove that the table is identical.

Does the same code mean the same thing on all Beko washing machines?

No. Codes vary between Beko platforms. Check that the appliance manual confirms the meaning before using a list for another series.

How can I tell a normal alert from a fault?

Check whether the alert appears during the current wash or in an earlier record. A saved condition and a fault that recurs during the cycle need to be assessed differently.

Does clearing the code confirm that the problem is fixed?

No. Removing a display or checking the history again does not prove that a supply issue, load problem or leak has been fixed. Assess how the appliance operates after carrying out the permitted correction.

What information should I give the service technician?

Provide the full model number, the code, and whether it came from the current cycle or the history. Include the cycle stage, available supply, laundry load and any water visible underneath the appliance.

Describe what is happening now as well as the saved code: history and current behaviour are complementary information.