E8 in the Beko B3WFU48215WW ES manual indicates that the appliance may not be taking in water. Check the water supply, hose and door closure for this model.
Water supply and door closure
The manufacturer’s documentation, in its table of warnings, recommends checking the taps, water supply interruptions, a kinked hose and the door closure. Note whether the appliance does not fill at all, fills slowly or takes in water that then leaks out.
With the machine stopped, check that no clothing is preventing the door from closing. Do not infer a solenoid valve fault from the absence of visible water; the code does not identify a component on its own.
Why the pump filter is mentioned too
This model’s table includes cleaning it as part of the E8 troubleshooting process. Only do this by following the procedure in the manual, with the appliance safely disconnected, cold water and controlled draining before removing the cap. This check should not be applied to all Beko series.
After correcting the accessible conditions, try again as instructed. If the fault continues, request assistance. State whether E8 appears during the cycle or was found in the historical information; an earlier record does not necessarily describe the current state.
Keep your observation about the water alongside the code: not filling and losing water while filling are different situations.
View all articles in Beko washing machine error codes and warnings
