E5 and E27 warnings on Beko: filter and water drainage

On the Beko B3WFU48215WW ES, E5 points to the pump filter and E27 to the drain installation. For both, check the drainage system against the confirmed model.

Two warnings on the same drainage path

The table on page 40 of the manufacturer’s documentation does not present E5 and E27 as interchangeable codes. For E5, check that the filter is clean; for E27, compare the hose and its connection in particular with the installation section.

Check for kinks, a blocked household drain and the height of the drain hose. Do not use a measurement from another series or change any connections without checking the manual.

Preparing to clean the filter

Stop the appliance, disconnect it safely and let the water cool. Use the designated gradual-draining procedure, with a container ready and a way to stop the flow. Remove the filter only afterwards; clear any accessible debris and refit it securely to prevent leaks.

If the drainage path is clear and the warning reappears during operation, arrange a service visit. If you saw it only in the history, note that and the appliance’s current behaviour: do not dismantle parts to clear an old record. Cleaning the drain filter provides further preparation guidance.

The disappearance of a stored code does not confirm that water is draining from the appliance properly.

View all articles in Beko washing machine error codes and warnings