E12 in the Beko B3WFU48215WW ES error code table warns of possible water inside or underneath the machine. If you can see a leak, turn off the taps and request assistance.
External inspection
The manufacturer's documentation advises requesting a service visit if the condition persists or a hose is visibly leaking. From a dry area, check where the water is appearing: the inlet connection, outlet, filter or base of the casing. Note which stage of the cycle it occurs at.
Disconnect the machine only if the socket is dry and accessible. If water reaches electrical connections, do not touch the plug or cross the puddle; ask for help to isolate the machine. Do not open any panels to locate water inside.
Drying is not the same as repairing
Removing water from the floor allows you to see whether more leaks appear, but does not confirm that the cause has been fixed. Do not tilt the appliance or run a test cycle if it is still dripping. The Beko index lets you check the warning against the documented platform.
If E12 comes from a historical record, distinguish that from a current leak. If the issue recurs or the source is inaccessible, the full model number is needed for diagnosis; do not assume the table applies to another Beko model.
Note where the water is before drying it, provided you can do so without going near a wet electrical area.
View all articles in Beko washing machine error codes and warnings
