E29 on the Beko B3WFU48215WW ES indicates that the appliance has activated protection mode because of a supply issue, such as the electrical voltage or water pressure. The code does not identify which one is affected.
What changed with the supply
The manufacturer's documentation groups several conditions under E29. Note whether it coincided with a power cut, a water outage, a tap being turned off or work on the installation. From the outside, check whether the appliance still has power and whether there is water in the property.
Do not test electrical circuits or switch to another socket using extension leads. If there is electrical damage, the plug is getting hot or there is water near the connection, stop using the appliance and seek help.
Cancel using the control panel
For the documented platform, the manual refers to the cancellation section and selecting another programme. Use this procedure only after resolving the supply issue and confirming that it applies to your model; the buttons vary between series.
If E29 appears again once the supply has been restored, request a diagnosis. If the message disappears after cancelling, that does not confirm that the fault has been repaired. If you saw it in the history, mention this and say whether the problem is still happening.
Explain whether the water, electricity or both were unavailable: E29 alone does not distinguish between these conditions.
View all articles in Beko washing machine error codes and warnings
