AQUA washing machine error codes and warnings

AQUA washing machine error codes and warnings

The AQUA notices in this index are based on Japanese documentation and compatible machines. E1/E2, U3/U4, UL, H and U6 relate to different situations and should not be applied to Haier or Sanyo machines.

Identify the design and functions

The official Japanese AQUA FAQ distinguishes between washing machine types and machines with drying or bathwater reuse functions. Check your model's manual to see which functions it has before adopting an explanation.

E1 points to the water supply and E2 to drainage. U3 helps you check the spin cycle, and U4 here refers to an open lid detected on a top-loading machine. The height of a hose and the position of the filters depend on the drainage design.

Lock, heat and bathwater

UL denotes the child lock on the documented machines. H when drying is interrupted may appear during the cooling phase, when the lid remains locked; it does not mean that every code beginning with H indicates the same status.

U6 affects the circuit that draws water from the bath, where fitted. It does not apply to a machine without this function, and should not automatically be attributed to the mains water supply.

Photograph the message and note which stage of the cycle it appears during. Sharing a corporate group or brand history does not justify using a Haier or Sanyo table to fill in missing codes.

Frequently Asked Questions

Are AQUA codes the same as Haier codes?

You should not assume they are the same. This index uses AQUA-specific documentation and does not infer equivalences based on corporate group membership.

Is UL a fault or the child lock?

On the documented AQUA machines, UL denotes the child lock. Follow the manual to deactivate it; the code alone does not confirm that the lid is ready to open.

What does U6 mean on a machine that reuses bathwater?

For this function, U6 indicates a problem drawing water from the bath. The auxiliary circuit should be distinguished from the normal mains water supply.

What information do I need to choose the right table?

The full model number, load type and functions available, especially drying and bathwater recovery. Also keep a record of the full message and when it appears.

If your AQUA machine does not have the function described, stop using that interpretation and find the manual for its model.