U6 warning on AQUA washing machines: not drawing water from the bath correctly

U6 affects the drawing of water from the bath on AQUA machines with this function. It is an auxiliary circuit, separate from the mains water supply.

The official Japanese FAQ documents U6 on machines with bath-water recovery. If your machine does not have this function, confirm the code and model reference before applying this explanation.

Check the auxiliary circuit while it is stopped

Check that there is water available in the bath and that the suction end is submerged as described in the manual. Check whether the hose is coiled, bent, crushed or damaged, and whether the external connection is properly seated.

The permitted height and filters vary depending on whether the system is internal or external. Only carry out the user cleaning specified in the manual, and do not dismantle the pump. Do not use water containing bath products that the manual does not permit.

The documentation says that you can continue using mains water when this issue is detected; confirm how this applies to your model. The fact that the wash continues does not prove that auxiliary suction has been restored.

If U6 persists, report the type of circuit and the condition of the auxiliary hose, rather than attributing the issue solely to the mains tap.

View all articles in AQUA washing machine error codes and warnings