
The AQUA alerts in this index are based on Japanese documentation and compatible equipment. E1/E2, U3/U4, UL, H and U6 refer to different situations and should not be applied to Haier or Sanyo.
Identify the design and features
The official Japanese AQUA FAQ distinguishes between washer types and machines with drying or bathwater reuse features. Check your model’s manual to see which features it has before applying an explanation.
E1 points to the water supply, while E2 points to drainage. U3 helps you check the spin cycle, and U4 refers here to a top lid detected as open. The required hose height and filter locations depend on the drainage design.
Locking, heat and bathwater
UL indicates the child lock on the documented models. H when drying is interrupted may appear during cooling, which keeps the lid locked; it does not mean that every code beginning with H indicates the same status.
U6 affects the circuit that draws bathwater when that feature is available. It does not apply to a machine without this feature, and should not automatically be attributed to the mains water supply.
Take a photo of the message and note which stage of the cycle it appears in. A shared corporate group or brand history is not a reason to use a Haier or Sanyo chart to fill in missing codes.
Frequently Asked Questions
Are AQUA codes the same as Haier codes?
You should not assume they are the same. This index uses AQUA-specific documentation and does not transfer code equivalents based on corporate group membership.
Is UL a fault or the child lock?
On the documented AQUA models, UL indicates the child lock. Follow the manual to deactivate it; the code alone does not confirm that the lid is ready to open.
What does U6 mean on a machine that reuses bathwater?
For this feature, U6 indicates a problem drawing in bathwater. Distinguish the auxiliary circuit from the regular mains water supply.
What information do I need to choose the right chart?
The complete model number, load type and available features, especially drying and bathwater recovery. Also note the full message and when it appears.
If your AQUA machine does not have the feature described, stop using that interpretation and find the manual for your model.




