Descale only when water conditions, deposits and the model’s instructions warrant this treatment. Use a compatible product and follow its complete procedure; don’t treat every white residue as limescale.
Before choosing a descaler
Gather information about the water hardness, the maintenance history and what you observe. A greasy film or detergent residue may require a different cleaning method. Bosch distinguishes between a descaler for mineral deposits and a cleaner for greasy residue and says to follow the instructions on each container.
If you’re looking into this because the machine isn’t heating or has a fault, don’t use descaling to diagnose the heating element. You can’t fully inspect its surface from inside the drum.
Preparation and application
- Check that the product is suitable for your machine type and its materials. Review the restrictions in the manual and on the label.
- Empty the washer and remove any visible residue that isn’t part of the scale buildup. Make sure no other product remains in the system.
- Apply the specified amount in the designated location. Don’t assume the descaler goes in the detergent dispenser.
- Run an approved cycle and let it complete all its stages.
- Run any rinse cycles required by the treatment before washing clothes again.
Don’t mix descaler with chlorine bleach or try to boost its effect using household acids. If another substance has been used or you’re unsure whether any residue remains, check product safety before starting.
Check the result without opening the machine
Check accessible surfaces and see whether any residue needs to be removed. Don’t assume from its appearance that the entire heating element is free of deposits. If the buildup persists, check whether the manufacturer allows another application; don’t increase the concentration or temperature.
If deposits return, review water prevention and treatment. Follow the equipment and water-supply conditions when deciding how often to treat the machine; don’t treat one brand’s recommended interval as a universal rule.
Completing a descaling treatment addresses the approved treatment; it doesn’t certify the condition of every internal component or guarantee recovery of a specific level of performance.
View all articles in Limescale and water quality: caring for your washing machine
