The power supply must match the washing machine’s nameplate and manual and meet local requirements. A plug fitting the receptacle does not prove that the voltage, frequency, grounding and protective devices are suitable.
Document check before connecting
Check the acceptable voltage and frequency, rated power or current, and type of connection. Compare these with the intended supply. A receptacle that looks identical may be connected to a circuit that does not meet the required conditions.
Grounding and protection against electrical hazards must match the equipment’s design and the local installation. Do not remove the grounding contact or increase a protective device’s rating to prevent it from tripping.
What you can check without testing live circuits
- The cord and plug have no visible cuts, crushing or signs of overheating.
- The receptacle is located and protected according to the permitted location.
- Access to the designated disconnecting means.
- The cord is routed without tension, pinching or makeshift connections.
An extension cord, power bar or adapter is not a substitute for a proper connection. If a receptacle needs to be added, wiring changed, or grounding and protective devices checked, this must be done by an electrician in accordance with local requirements. Do not perform this check using household measurements on energized parts.
Cases requiring a different assessment
For an appliance from another market or an independent power source, check voltage and frequency compatibility. If connections are damp, there is damage or an electrical odour, or the circuit trips repeatedly, do not energize the appliance to test it.
The start-up checks operation once the power supply issue has been resolved; it does not, on its own, certify that the circuit is safe.
If you cannot confidently compare the nameplate with the installation, give that information to an electrician before plugging in the appliance.
View all articles in Washing machine installation: requirements and checks
