dE / dE1 / dE2 / dC1 error on Samsung washers: door closure not confirmed

In the Samsung documentation consulted, dE, dE1, dE2 and dC1 indicate that door closure has not been confirmed. A door that appears to be closed may still not be locked for the cycle to start.

The Samsung table lists those door-related signals. Check the model reference before adding other aliases; dC has a model-specific ambiguity.

A visual check of the latch

If the drum is stopped and the door can be opened, check for clothing caught in the door or a load pressing against it from inside. Close the door without slamming it. Check for damage to the latch or handle, but don’t disassemble or bypass the door lock.

If the fault appears partway through a cycle when there is water in the washer or the temperature is high, being unable to open the door may be an additional safety measure. Don’t pull on the door to repeat the external check.

If the latch area is clear and the message returns after the recovery procedure specified in the manual, request service. Note whether the cycle never started, water entered the washer, or it stopped during washing: this information helps the technician determine which state to check.

Don’t substitute an audible click for the confirmation specified in the manual: mechanical closure and electronic authorization of the cycle are separate checks.

View all articles in Samsung washer error codes and messages