Bosch washer error codes and warnings

Bosch washer error codes and warnings

Bosch codes are interpreted using the washer’s E-Nr. This index covers verified door, water inlet, drainage, leak and suds warnings, with limitations by platform.

The E-Nr determines which manual to use

The complete identification from the rating plate helps you find the manual and check the code exactly as it appears. Keep the letters, zeros, colons and suffixes. A matching number on a Bosch dishwasher does not identify the same fault.

Identify the affected system

Documented warningWhat to check first
E16Door lock recognition.
E17/F17Water supply time exceeded.
E18Drainage, filter and drain hose.
E23Leak or water in the base.
E33Detergent dosing and excessive suds.

If water is trapped, use the E18 guide before opening a filter. If water is leaking, E23 requires you to address the leak, not start a test cleaning cycle. The E17/F17 pair is documented by Bosch; that does not mean you can interchange E and F in any other code.

What you can check yourself

Limit checks to the door lock, water supply, hoses and accessible parts permitted by the manual. Prepare to drain the water before opening a filter; shut off the water before disconnecting an inlet. Warnings that persist after external conditions have been corrected require diagnosis.

If the panel displays a different combination, consult the E-Nr manual or request service. Do not look for a replacement part based solely on the error number.

Frequently Asked Questions

Where can I find the full model number of my Bosch washer?

Look for the E-Nr on the rating plate and copy its suffix too. The appliance documentation indicates where to find it; you do not need to remove the casing to locate the model number.

Does the same code mean the same thing on all Bosch washers?

You should not assume so. Bosch uses different generations and platforms, and a dishwasher code is not interpreted as a washer code. The E-Nr manual confirms which codes apply.

How can I tell a normal notification from a fault?

Check the message and the programme status. An indicator showing an active function may be normal; a code that repeatedly interrupts the cycle requires the checks specified in the manual.

Does clearing the code confirm that the problem is fixed?

No. A code disappearing from the display does not prove that a drain is clear or a leak has been repaired. The physical condition and subsequent operation determine whether the issue persists.

What information should I provide to the service technician?

Provide the complete E-Nr, the FD number if it appears on the rating plate, the exact code and the cycle stage. Describe any trapped or visible water, installation changes and maintenance already performed.

The complete warning text and E-Nr are more useful than the series’ marketing name.