Ub / UE / U6 and Ur alerts in Samsung washers: imbalance and spin retry

Ub, UE and U6 indicate an imbalance that may prevent a Samsung washer from completing its cycle. Ur means the washer is trying to rebalance the load.

This distinction comes from the Samsung USA table. Ur may extend the cycle without indicating a fault on its own.

Wait for the retry or redistribute the load if the washer stops

If Ur appears and the washer continues trying to recover, let it follow the intended sequence. Don’t routinely open the door or cancel the cycle just because the time increases.

If it stops with Ub, UE or U6, pause and wait until the drum and door lock allow you to intervene. Untangle and redistribute any items that have bunched together. Check whether a highly absorbent item is mixed in with lightweight laundry, or whether the load exceeds the programme’s capacity; the solution isn’t to add or remove laundry without considering its composition.

Check that the washer is stable while it’s stopped. If it rocks or the problem began after it was moved, the installation also needs to be checked. Don’t increase the spin speed to override the protection.

Interpret dC according to the model before including it in this group. If the issue keeps recurring with suitable loads and a stable washer, contact service.

Note whether the washer managed to resume spinning or eventually aborted the cycle: this distinguishes an informational retry from a persistent issue.

View all articles in Samsung washer error codes and messages