Error 5C / 5E / nd on Samsung washers: insufficient draining

5C, 5E and nd indicate insufficient draining on the documented Samsung models. SC and SE may look similar on the same display; confirm the characters before choosing a guide.

This code family appears in the official Samsung USA table. A drain warning can then prevent the spin cycle, even when the drum motor isn’t the cause.

If water remains inside

Stop retrying and check the external hose for crushing, kinks or an outlet connection that doesn’t meet the manual’s requirements. If the household drain is overflowing, that drain also needs attention; a clean filter won’t clear a blockage in the plumbing.

Before accessing the filter, confirm that your model has a user-accessible filter and check its draining procedure. Disconnect the power and let the water cool. Don’t remove the cap completely with the drum full: prepare for residual water and have the recommended containers ready.

If the pump makes a sound, don’t assume it’s pumping properly. Note whether the water drains slowly, intermittently or not at all. If the code returns after you’ve cleared visible restrictions and completed permitted maintenance, request service without opening the pump.

A photo of 5C/5E can help distinguish similar-looking characters; include it with the model number and the water’s status when requesting an inspection.

View all articles in Samsung washer error codes and messages