
Panasonic alerts must be identified by machine type and product family. The FR1 documentation separates water, door, spin, drying and connectivity alerts; not all of these alerts apply to every machine.
Check the scope before using the table
The Panasonic New Zealand reference identifies the NA-V10FR1 washing machine and the NA-S106FR1 washer-dryer. For a top-load model or another generation, consult its manual; a pump-drainage measurement may be unsuitable for a gravity-fed outlet.
Which need each route addresses
- U11: check drainage; U14: check the water supply.
- U12: identify the door-lock issue; U13: check for an interrupted spin cycle.
- U15: drainage during drying, only on a machine with this function.
- U81 to U84: smart-function connection, with differences between router, server and credentials issues.
Record the complete message and what the machine was doing. A connection issue does not indicate a motor fault. For an H message, keep the characters that accompany it and contact the support service specified in the manual; do not reduce it to a brand-wide reset rule.
User checks should be limited to the exterior and authorized maintenance access points. Do not test sensors or internal components based on the index.
Frequently Asked Questions
Does U11 mean the same thing on a front-load and top-load model?
U11 is documented as a drainage alert for FR1 and in other Panasonic support materials, but the procedure depends on the machine’s design. The height specified for a pumped outlet does not apply to a gravity-fed outlet.
What is the difference between U12 and U13?
For FR1, U12 indicates that the door is open, while U13 indicates that the machine cannot spin. Although both can stop the cycle, they require different checks.
Can H alerts be resolved with a reset?
There is no universal reset for H alerts. The FR1 reference directs users to support for these messages; record the complete code and follow the machine’s manual.
Which errors appear only on connected machines?
In the FR1 family, U81, U82, U83 and U84 relate to connectivity. They should not be applied to a Panasonic machine that does not have this function.
The reference and active function help you choose the relevant article without applying a drying-only alert to a washing machine.




