Panasonic washing machine error codes and warnings

Panasonic washing machine error codes and warnings

Panasonic warnings should be identified by machine type and family. The FR1 documentation separates water, door, spin, drying and connectivity issues; not all of these warnings apply to every machine.

Check the scope before using the table

The Panasonic New Zealand reference identifies the NA-V10FR1 washing machine and the NA-S106FR1 washer-dryer. For a top-loader or a different generation, consult its manual; a drainage measure for a pump outlet may be unsuitable for a gravity-fed outlet.

Which issue belongs to each route

  • U11: check the drainage; U14: check the water supply.
  • U12: check the door latch; U13: check for an interrupted spin cycle.
  • U15: drainage during drying, only on a machine with that function.
  • U81 to U84: smart-function connection, with differences between router, server and credentials.

Record the full message and what the machine was doing. A connection issue does not indicate a motor fault. For an H message, keep the characters that accompany it and contact the support service specified in the manual; do not reduce it to a brand-wide reset rule.

User checks should be limited to the exterior and authorised maintenance access points. Do not test sensors or internal components based on the index.

Frequently Asked Questions

Does U11 mean the same thing on a front-loader and a top-loader?

U11 is documented as a drainage issue on FR1 machines and in other Panasonic guides, but the procedure depends on the machine's design. The height for a pump outlet does not apply to a gravity-fed outlet.

What is the difference between U12 and U13?

On FR1 machines, U12 indicates that the door is open and U13 that the machine cannot spin. Although both may stop the cycle, they require different checks.

Can H warnings be fixed by resetting the machine?

There is no universal reset for H warnings. The FR1 reference directs users to support for these messages; record the full code and follow the machine's manual.

Which errors only appear on connected machines?

In the FR1 family, U81, U82, U83 and U84 relate to connectivity. They should not be applied to a Panasonic machine that does not have this function.

The model reference and active function help you choose the relevant article without applying a drying-only warning to a washing machine.