U13 indicates that a Panasonic FR1 washer is unable to spin. Check the load distribution and the washer’s support before interpreting the stop as a motor failure.
The FR1 family table assigns U13 to that stage. The capacity and recovery steps should match the washer’s manual.
What to check when it stops
Once the drum has stopped and the door unlocks, untangle any bunched-up items and redistribute a load that has collected on one side. If there is only one highly absorbent item, check that it is compatible with the cycle; repeatedly trying to spin it will not necessarily correct the load distribution.
Do not routinely add laundry to a full drum. The permitted weight depends on the cycle and fabric type. Resume using the sequence specified in the manual, without increasing the spin speed to override the protection.
If this happens with different loads, check whether the stopped washer is properly supported and whether it rocks. If the issue persists with the laundry evenly distributed and the washer properly supported, it needs a technical inspection. U13 does not identify the bearings, suspension or motor separately.
Note the load’s composition and whether U13 recurs with a typical load; this will help distinguish a usage issue from a recurring problem.
View all articles in Panasonic Washing Machine Error Codes and Alerts
