Panasonic washing machine error codes and warnings

Panasonic washing machine error codes and warnings

Panasonic warnings should be identified by machine type and family. The FR1 documentation separates water, door, spin, drying and connectivity issues; not all these warnings apply to every appliance.

Check the scope before using the table

The Panasonic New Zealand reference identifies the NA-V10FR1 washing machine and the NA-S106FR1 washer-dryer. For a top-loader or another generation, check its manual; a pump-drain measure may be unsuitable for a gravity outlet.

Which issue each route relates to

  • U11: check drainage; U14: check the water supply.
  • U12: identify the door lock; U13: check for an interruption to the spin cycle.
  • U15: drainage during drying, only on a machine with this function.
  • U81 to U84: smart-function connection, with differences between the router, server and credentials.

Record the full message and what the machine was doing. A connection issue does not indicate a motor fault. For an H message, keep the accompanying characters and contact the support service specified in the manual; do not reduce it to a brand-wide reset rule.

User checks should be limited to the exterior and authorised maintenance access points. Do not test sensors or internal components based on the index.

Frequently Asked Questions

Does U11 mean the same thing on a front-loader and a top-loader?

U11 is documented as a drainage issue for FR1 and in other Panasonic support information, but the procedure depends on the machine design. The height for a pump outlet does not apply to a gravity outlet.

What is the difference between U12 and U13?

On FR1, U12 indicates that the door is open, while U13 indicates that the machine cannot spin. Although either may stop the cycle, they require different checks.

Can H warnings be resolved with a reset?

There is no universal reset for H warnings. The FR1 reference directs users to support for these messages; record the full code and follow the appliance manual.

Which errors appear only on connected appliances?

In the FR1 family, U81, U82, U83 and U84 relate to connectivity. They should not be applied to a Panasonic appliance that does not have this function.

The model reference and active function help you choose the relevant article without applying a drying-only warning to a washing machine.