Error U12 on Panasonic washing machines: door open or not fully closed

U12 indicates an open door on the Panasonic FR1 family. Check that the door is visibly closed when the machine allows you to open it; don’t confuse this with a lockout due to water or temperature.

The FR1 table identifies this status for NA-V10FR1 and NA-S106FR1. A top-load washer may require a different arrangement and procedure.

If the cycle won’t start

Make sure the laundry is inside the drum and isn’t caught in the door seal. Check whether anything is preventing the door from reaching its closed position, then close it normally. Don’t bang on it or hold the latch down to try to start the programme.

If the door is already closed but U12 appears again, make a note of that. The message alone doesn’t distinguish a broken part from another failure to confirm the door is closed.

If it appears during the programme

Pause the cycle and respect the machine’s lockout. Water, heat or movement may prevent the door from opening, even if you want to check the edge. Don’t force the handle or bypass the lock. If the area around the machine is clear and the message persists, request service and provide the model number and where you were in the cycle.

When requesting help, distinguish between a door that won’t latch and one that latches but is still detected as open.

View all articles in Panasonic Washing Machine Error Codes and Alerts