U11 indicates a drainage failure on the Panasonic FR1 and other documented washing machines. How to check the hose depends on whether the washer has a drain pump or drains by gravity.
The Panasonic FR1 table lists U11 for the NA-V10FR1 and NA-S106FR1. For other machines, confirm the meaning of the code and the drainage setup before changing the installation.
Identify how the water drains
For a pump-assisted drain, follow the manual’s instructions for hose height and connection; lowering the hose without checking can cause siphoning. For gravity drainage, raising the hose like that of a front-load washer can block the flow. Do not interchange these instructions.
With the appliance stopped, check for kinks, compression and external blockages. If there is a filter that the manual says you can clean, first prepare to drain the water in a controlled way, with the power disconnected and the water cold. The door may remain locked because the water has not drained.
Do not force the door open or remove the filter while the water is hot. If U11 persists after the accessible checks, contact support. Do not assume from the code alone that the pump needs replacing, especially if your model does not use one.
Tell support whether the washer is a top- or front-load model and provide a view of the external hose routing; this will help them check whether the installation matches that setup.
View all articles in Panasonic Washing Machine Error Codes and Alerts
