ASKO Error E11: Overfill and Overflow

E11 on the ASKO WM76S indicates an excessive water level or overflow. If water continues to enter despite the warning, turn off the tap and request service.

Protective draining or continuous water intake

The manufacturer’s documentation explains that the control may interrupt the programme and start draining when it detects an excessive water level. From outside the appliance, check whether it is draining water or whether water continues to enter and the level is rising.

If water continues to enter, the manual says to turn off the water supply and request assistance. Don’t repeatedly restart the appliance to see whether E11 disappears, and don’t open the door when the water level is high. If there is water near electrical connections, avoid contact and get help to isolate the appliance.

After the protective response

If draining completes, follow only the recovery procedure permitted by the model’s manual. If the error reappears, request service; this alone does not confirm a faulty inlet valve or sensor.

Record the code, programme stage and whether water was continuously entering. A washer that overfills explains the difference between a water supply that won’t shut off and other observations. E9/E9.1 refers to a leak and should not be confused with this water-level warning.

If the water level keeps rising, the crucial step is to stop the accessible water supply—not to clear the display.

View all articles in Error codes and alerts for ASKO washing machines