E23/E23.1 and E24 on ASKO WM76S indicate unlocking problems. Before retrieving the laundry, check that the cycle has ended, the water has drained and the drum has stopped.
Door remains locked after the program
The manufacturer’s documentation distinguishes these alerts from initial locking failures. Note the decimal and check whether a function that keeps the laundry in water was left on, or whether a cycle phase still needs to finish. A normal safety delay is not, by itself, an error.
Resetting and opening this model
The manual recommends turning the machine off and back on for a release failure. If the problem recurs, contact service. To retrieve laundry manually, follow the WM76S emergency door opening section, ensuring the machine is disconnected from power, the water has been drained and conditions are safe.
Do not insert a screwdriver beside the lock based on instructions for another appliance. If you cannot check the water level, temperature or exact opening point, stop the procedure. Door, lid and safety lock explains the prerequisites.
If the door opens but the alert returns in another cycle, request a diagnosis. Retrieving the laundry does not prove that the unlocking system has been repaired.
Report whether the fault appeared at the end of a cycle, after cancelling a cycle or following a power outage.
View all articles in Error codes and alerts for ASKO washing machines
