E9 and E9.1 in the ASKO WM76S manual indicate leak detection in the washer area. Check the exterior and stop using the washer if water continues to escape.
Visible water and water supply
The manufacturer’s documentation can help distinguish between a leak and a warning that does not reappear after the prescribed check. If there is a visible leak, turn off the accessible tap and request service. Do not retry the procedure in the manual while water is still escaping.
Check whether water appears near the inlet, outlet, drawer, door or base. Note when it started and whether any connections were recently handled. Do not disassemble or tilt the appliance to remove water and clear the detection.
If the exterior appears dry
Confirm the procedure for your model before continuing; not seeing a puddle does not, by itself, identify the cause. If the warning returns or you cannot verify that conditions are safe, contact service.
Use exterior leak location to record where the water is. E11 indicates an excessive water level and overflow, while E7 indicates a drainage issue: do not assume these codes have the same meaning as E9/E9.1.
Drying the floor makes it possible to see whether the leak recurs; it does not confirm that the leak has been repaired.
View all articles in Error codes and alerts for ASKO washing machines
