Self Clean, Pure Cycle and Drum Clean are names for interior-cleaning functions on different Samsung washing machines. Select the one specified in your manual and check whether it should run without a cleaning product: requirements vary between product ranges and markets.
The product name alone is not enough to apply instructions
Also look for Eco Drum Clean or Drum Clean+ if that is what appears on the control panel. In its US guide to Self Clean and Pure Cycle, Samsung says these functions do not normally require a cleaner. The Australian guide to Drum Clean and Tub Clean prohibits adding detergent or cleaning agents to the functions it describes. An exception for treating odours should not be applied to a programme that prohibits them.
How to use the function
- Identify your model, market and the exact name of the function.
- Empty the machine and remove any visible objects. Do not leave clothes inside to make use of the cycle.
- Check the preparation requirements, including any prior manual cleaning and product requirements.
- Close the door or lid and select the function using the dial, button or menu described in the manual.
- Start the cycle and let it finish. Once the door unlocks and the machine has cooled, remove any visible residue as directed and run a rinse if instructed.
Reminders and residue after cleaning
A reminder prompts maintenance in line with the machine's design; it does not indicate a fault. Check what the alert means, and do not confuse it with a message that prevents a programme from continuing.
If residue appears after cleaning, compare how much remains after following the procedure. Do not add chemicals to dissolve it without identifying what it is. If visible contamination persists, check for mould and damp deposits as well as the seal and the detergent drawer.
The duration, the number of cycles that triggers the reminder and how to select the function are not the same for all Samsung machines. Refer to your manual when you need to schedule maintenance.
A function that normally runs with water alone should be used that way unless the manufacturer gives a specific, applicable instruction to do otherwise.
View all articles in Drum-cleaning cycle: function, preparation and limitations
