Samsung Self Clean, Pure Cycle and Eco Drum Clean: How to Use Them Correctly

Self Clean, Pure Cycle and Drum Clean are names for interior-cleaning functions on different Samsung washing machines. Select the one specified in your manual and check whether it should run without a cleaning product: requirements vary by product family and market.

The name alone isn’t enough to apply instructions

Look for Eco Drum Clean or Drum Clean+ too, if that’s what appears on the control panel. In its U.S. guide to Self Clean and Pure Cycle, Samsung says these functions normally run without a cleaner. The Australian guide to Drum Clean and Tub Clean prohibits adding detergent or cleaning agents to the functions it describes. An exceptional instruction for treating odours shouldn’t be applied to a cycle that prohibits them.

How to use the function

  1. Identify the model, market and exact function name.
  2. Empty the machine and remove any visible objects. Don’t leave laundry in the machine to make use of the cycle.
  3. Check the preparation requirements, including any required manual cleaning and product-specific instructions.
  4. Close the door or lid and select the function using the dial, button or menu described in the manual.
  5. Start the cycle and let it finish. Once the door unlocks and the machine cools, remove any visible residue as directed and run a rinse if instructed.

Reminder and residue after cleaning

The reminder prompts maintenance according to the machine’s design; it doesn’t indicate a fault diagnosis. Confirm what the alert means, and don’t confuse it with a message that prevents you from continuing a cycle.

If residue appears during cleaning, check whether there’s less of it after following the procedure. Don’t add chemicals to dissolve it without identifying what it is. If visible contamination persists, check for mould and damp deposits along with the gasket and the detergent drawer.

The duration, the number of cycles that triggers the alert and the selection method aren’t the same for all Samsung machines. Refer to your manual when you need to schedule maintenance.

A function that normally runs with water alone should be used that way unless the manufacturer provides a specific, applicable instruction to do otherwise.

View all articles in Drum-cleaning cycle: function, preparation and limitations