Self Clean, Pure Cycle and Drum Clean are names for interior cleaning functions on different Samsung washing machines. Select the function specified in your manual and check whether it should run without a cleaning product: the conditions vary between product families and markets.
The feature name alone is not enough to apply instructions
Also look for Eco Drum Clean or Drum Clean+ if that is what appears on the control panel. In its US guide to Self Clean and Pure Cycle, Samsung says that these functions do not normally require a cleaner. The Australian guide to Drum Clean and Tub Clean prohibits adding detergents or cleaning agents to the functions it describes. An exceptional instruction for treating odour should not be applied to a programme that prohibits them.
How to use the function
- Identify the model, market and exact name of the function.
- Empty the machine and remove any visible objects. Do not leave clothes inside to make use of the cycle.
- Check the preparation requirements: any manual cleaning beforehand and any product requirements, if applicable.
- Close the door or lid and select the function using the dial, button or menu described in the manual.
- Start the function and let it finish. Once the door unlocks and the machine cools down, remove any visible residue as instructed and run a rinse if specified.
Reminder and residue afterwards
The reminder prompts maintenance according to the machine's design; it does not necessarily indicate a fault. Check what the alert means, and do not confuse it with a message that prevents a programme from continuing.
If residue appears during cleaning, compare the amount after the procedure. Do not add chemicals to dissolve it without identifying what it is. If visible contamination persists, check for mould and damp deposits as well as the door seal and the detergent drawer.
The duration, the number of cycles that triggers the reminder and the way to select the function are not the same for all Samsung machines. Refer to your manual when you need to schedule maintenance.
A function that normally runs with water alone should be used that way unless the manufacturer gives a specific instruction that applies to your model.
View all articles in Drum-cleaning cycle: function, preparation and limitations
